Search Results

Cornwall Out of gallery

Sandwich Bread Loaf Making home bread is easy. We do not buy bread but make our own, and with a little patience and the correct utensils, anyone should be able to make their own bread loaves, rolls, or French sticks. When making your own bread you know what is in it and how it has been handled. In my locality we found the bread and pastries to be over-baked. If you prefer hard, crispy tops to your loaves, it is amazingly easy to do without over-baking them. ​ Large 2lb Soft Sandwich Bread Loaf – around 74% Hydration Bread Recipe ​ 435g - Strong White Flour - ideally it should have a protein level of 12.5 to 13g. 245g - Warm Water – roughly 40°C / 104°F in a jug or bowl 20g – Olive Oil 7g – Instant Dried Yeast OR 15g of Fresh Yeast 6g – Table Salt 6g – Granulated Sugar Word printable recipe PDF printable recipe Method Weigh 245g warm water in a container and stir in the 6g sugar , then the yeast and 20g extra virgin olive oil and stir until thoroughly mixed. ​ Cover and leave the yeast to begin to show signs that it is active (you should see bubbles on the surface of the mixture), this can take up to 10 minutes , but at lower temperatures, it may take a little longer. If the yeast shows no signs of being active, discard and use new yeast. I place the container in a bowl of warm water at 40°C and keep topping up as required. ​ Mix 435g - Strong White Flour and 6g salt in a separate bowl. ​ Mix active yeast mix with flour and knead correctly for at least 10 minutes (my video on bread making explains this). ​ Grease clean bowl with extra virgin olive oil, drop in the dough into the bowl, lift and turn so that there is olive oil on top of the dough. Cover and leave to prove for about 40 minutes (according to room temperature). I place the container in a tray of warm water at 40°C and keep topping up as required. After 40 minutes the dough should have doubled in size, if the room is cooler, let it prove longer. ​ I grease my 2lb bread tray with butter and then olive oil, and do not have problems with the bread sticking to the container. ​ Knead the dough for about 5-6 turns to get rid of the air and then shape the dough and place in a bread tin. You can dust the bread with flour at this time. I'm a paragraph. Click here to add your own text and edit me. It's easy. I put the bread tin with the dough into a large plastic container with about 30mls of warm water for the second prove. The plastic container has a tray in the bottom to prevent the bread tin from resting in the water. Cover with its lit and place in a tray of warm water to prove for about 40 minutes or until the dough has doubled in size. Preheat the oven to 190°C / 374°F or gas mark 5 . Place the bread tin into the oven and turn the heat down to 180°C / 356°F or gas mark 4 and cook for 15 minutes , the centre of the oven turning the bread tin and cooking for a further 15 minutes , for even cooking. *I have found that all ovens are not equal, mine, when set at 180°C its actual temperature is 160°C , so I must accommodate this variation by turning the dial to 200°C .

Linux Linux is an open-source operating system (OS), it sits underneath the other software on a computer, receiving requests from programs and relaying those requests to the computer’s hardware. A Linux distribution (often abbreviated as distro) is an operating system (OS) made from a collection of software based on the Linux kernel and often a package management system. A few acts and feels like MS Windows or macOS, and are relatively easy to use, while others are more complex to use. I mostly use Linux Mint, Puppy, and Mageia, but only as a personal preference. If I had to choose one it is Linux Mint as I find it is a good all-round operating system. ​ I have two dual boot systems (where I can choose to boot into either Linux or Windows – or Linux or macOS) and one triple boot computer (where I can choose to boot into either one of two Linux distro or Windows). So, why so many computers and operating systems? I use the computers and operating systems for different things but do most of my programming on Linux. Other tasks can be done on any of the operating systems. The advantage of Linux is, when I log onto Linux Mint, I can also view and move across the data from MS Windows, modify it and then move it back without the need to boot into Windows. This is extremely useful if the Windows operating system crashes and I need an aspect of data fast, as I can use Linux to get what I need. Especially useful for data rescue . ​ Also, Linux is not as hungry on a computer's resources, so Linux operating system and its programs can be installed and run on older lower spec computers and hardware. ​ Linux comes in many distro types or versions, a few are: ​ Mint Puppy Linux Mandriva Mageia Kubuntu Arch Linux Ubuntu Fedora Ubuntu Red Hat OpenSUSE Mandrake CentOS MX Linux Gentoo Slackware Debian Free BSD Additional Links: ​ Install WINE How does Linux differ from other operating systems (OS)? But many Windows programs will run quite happily on a Linux operating system, but you will need Wine (not the fluid type). ​ Wine is a free Linux tool to run Windows compatible software on a Linux operating system, without the need of MS Windows. ​ Wine is an open-source Windows compatibility layer that can run Windows programs directly on a Linux desktop. Basically, this open-source project is endeavoring to re-implement enough of Windows from scratch that it can run all those Windows applications without needing Windows. Linux is like MS Windows and macOS (formerly OS X or iOS). Like other operating systems, Linux has a graphical interface, and the same kinds of software you are accustomed to. There is a vast repository of free software available, an exceedingly small list is: ​ Word processors and PDF Editors – LibreOffice , PDF Studio , or OpenOffice Code and Text Editors – VS Code, Lyx , Simplenote , Laverna or Texmaker Photo, Image, Video and Audio editors – GIMP, Inkscape , Audacity , LMMS , Kdenlive , and OpenShot Screen Recording – Kazam , OBS (Open Broadcaster Software) , Flameshot or Ksnip Communication, Messaging, and Productivity Tools – Slack or Franz Virtualization options – Oracle , VM VirtualBox Authenticators - Authy Media Converters – Handbrake and SoundConverter Hardware and Software management systems – Stacer and Htop Backup Tools – Timeshift or Bacula Media Players – Audacious or VLC Media Server Software – Kodi and Plex Gamers – Steam and Discord Internet browsers - Firefox , Midori, Opera , Gnome , Google Chrome, Brave , Vivaldi , Falkon , Konqueror , Pale Moon , Waterfox , Slimjet, and Dissenter Email clients – Hiri and Thunderbird In many cases, software creators make a Linux version of the same program compatible with other operating systems. So, if you can use a computer or other electronic device, you can use Linux. ​ Nevertheless, Linux also is different from other operating systems in many significant ways. Linux is open-source software. The code used to create Linux is free and available to the public to view, edit, and for users with the appropriate skills to contribute to it. ​ Linux is also unusual in that, although the core pieces of the Linux operating system are generally common, there are many distributions (types or versions) of Linux, that include distinctive software options. Meaning, that Linux is incredibly customisable, not because applications like word processors and web browsers, can be changed, but Linux users can also choose core components, like which system display graphic or user-interface components used.

DVI-I - DVI-D - DVI-A Differences Differences between DVI-I - DVI-D - DVI-A connector types DVI connectors come in three types: DVI-D (digital) DVI-I (integrated; analog and digital) DVI-A (analog) DVI-I and DVI-D connectors have different data rates, also known as single-link or dual-link. Each link type has a maximum allowed data rate that ensures the data is not corrupted when transferred from the graphics card to a monitor. DVI uses Transition Minimized Differential Signalling (TMDS) to transmit data over a single twisted wire pair. A single-link DVI connector consists of four TMDS links. Three of the four links link to the red, green, and blue RGB video signals, while the fourth is the clock control channel. Single-link connectors operate up to 165MHz and offer 1.65Gbps of bandwidth and can support resolutions up to 1920×1200 at a refresh rate of 60Hz. Dual-link connections double the number of RGB TMDS pairs – exclusive of the clock pair, thereby enabling up to 2Gbps of bandwidth. They can also support higher resolutions up to 2560×1600 at a refresh rate of 60Hz. Dual-link connectors are fully backward compatible with single-link operation unless a display mode uses more than 165MHz pixel clock frequency or 24 bits per pixel. While a single-link connector cannot support dual-link connections at any time, so dual-link connections are preferable. DVI connection pins are comprised of an 8×3 rectangle pinout supporting TMDS, DDC, analog vertical sync, power, hot-plug detection, and ground signals. So there is: ​ Pins 1-24 4 analog pins for RGB and horizontal sync C1-C4 Long flat pin for analog ground C5 DVI-A connectors have 17 (12+5) pins, they do not have a dual-link option and only carry analog signals. These signals are equal to VGA signals but are presented as an altered configuration. So, a VGA to DVI adapter is necessary to connect a VGA video card to a DVI-A monitor or a DVI-A video card to a VGA monitor. Due to VGA being the dominant connector for analog monitors and DVI as a standard for digital signals for many years DVI-A connectors are rare, while DVI-I and DVI-D connectors are common. DVI-A cables will work with both DVI-A and DVI-I connectors. Male DVI-D cables may fit in a female DVI-A connector but will not work as they do not carry any analog signals. DVI-D connectors transfer digital video signals. There are two types: Single-link DVI-D connectors have 19 pins (18+1) Dual-link DVI-D connectors have 25 pins (24+1). DVI-D cables will work with both DVI-D and DVI-I connectors. HDMI and DisplayPort connectors will also support DVI-D video signals using an adapter, but DVI-D cannot support the supplementary features that HDMI and DisplayPort have, like: Integrated audio CEC control Most digital monitors will have a DVI-D connector, while monitors that support digital and analog signals usually have a DVI-D with a VGA connector. DVI-I single-link connectors have 23 pins (18+5) Dual-link connectors have 29 pins (24+5). DVI-I connectors will not convert analog and digital signals but will accept a digital or analog signal, but not at the same time. If a video card, monitor and cable all have DVI-I connections with the ability to support both analog and digital signals, one mode of operation must be selected. DVI-I connectors will work with all DVI cable types. But a male DVI-I cable will not connect to a female DVI-D connector owing to the additional analog pins. ​ ​ DVI Pins DVI Pins HDMI Pins HDMI Pins Display Port Pins VGA Port Pins Display Port Pins VGA Female DE15 socket - Port Pin This image displays and tables a 15-pin VESA DDC2/E-DDC connector, the diagram’s pin numbering is a female connector that functions as the graphics adapter output. While the male connector numbering corresponds with the cable's wire-and-solder side.

Networking and Internet It is a computer network is a group of computers or servers that use a set of common communication protocols over digital interconnections for the function of sharing resources located on or provided by the network nodes. The interconnections between nodes are formed from a broad spectrum of telecommunication network technologies, based on physically wired, optical, and wireless radio-frequency methods that may be arranged in a variety of network analysis situs. ​ Computer networks for the home and small business can be built using wired or wireless technology. In the past, a wired Ethernet has been the option is used in homes, but Wi-Fi wireless technology has improved greatly and is now commonplace. ​ Wired and wireless networks have advantages and disadvantages. They equally epitomise practical choices for home or other local area networks (LANs) and depend on the packages purchased by the user. ​ When possible, I prefer wired solutions as performance and security are better and more reliable. Wireless networks are convenient but can have performance and security issues. ​ Both have advantages and disadvantages. ​ Wireless networks allow devices to stay connected to the network but roam untethered to any wires. Access points amplify Wi-Fi signals, so a device can be far from a router but still be connected to the network. When connected to a Wi-Fi hotspot at a public place, café, hotel, airport lounge, the connection is with that business's wireless network. ​ Wired networks use cables to connect devices, such as desktop computers, laptops, or servers to access the Internet or additional network. A wired network has disadvantages when compared to a wireless network, the largest is that the device is tethered to a router. ​ Motherboards have at least one RJ-45 networking socket and some have integrated Wi-Fi adapters fitted. ​ A computer network is a collection of computers and/or hardware interconnected by communication channels that allow sharing of resources and information. ​ It is where a device, computer or server sends or receives data to or from another device, computer, or server in a remote location. When connected, the two devices are said to be networked. A network is a group is the sum of computers, tablets, phones, laptops, and servers that are connected. Networks are organised in a diverse group of physiognomies, such as, the method used to carry the data and communications protocols. ​ Communication protocols define the rules and data formats for swapping information in a computer network and provide the basis for network programming. Router A router is a networking device that forwards data several layer packets between computer networks, such as files, communications, and transmissions. Routers perform the traffic directing functions on the Internet. Data sent through the internet, like web pages or emails, data packets, a packet is normally forwarded from one router to router through the networks that make up the Internet until it reaches its destination node. ​ Data packets have several layers, or sections, one of which carries identifying information such as sender, data type, size, and most importantly, the destination Internet protocol (IP) address. The router reads this layer, prioritizes the data, and chooses the best route to use for each transmission.

2.GALLERY Vanda

Paint Η βαφή ενός μοντέλου κιτ είναι μια θεμελιώδης πτυχή της δημιουργίας μοντέλων και ο τύπος του χρώματος που χρησιμοποιείται είναι προσωπική προτίμηση. Λοιπόν, τι χρώμα χρησιμοποιείτε; Για μένα, οι κατασκευές Model Kit δεν συνδυάζουν απλώς το μοντέλο. Χρησιμοποιώ κυρίως μια επιλογή από βούρτσες αέρα, αλλά χρησιμοποιώ τεχνικές βουρτσίσματος χεριών για λεπτές λεπτομέρειες και καιρικές συνθήκες. Υπάρχουν πλεονεκτήματα και μειονεκτήματα στην επιλογή ενός τύπου βαφής. Χρησιμοποιώ χρώματα ακρυλικού , λάκας , με βάση το λάδι και περιστασιακά σμάλτο . Οι πιο συνηθισμένοι κατασκευαστές χρωμάτων που χρησιμοποιώ είναι: Vallejo - acrylicosvallejo.com/en/ AK Interactive - ak-interactive.com MIG AMMO - www.migjimenez.com/en/ MSP (Master Series Paint) - www.reapermini.com/paints Εργαστήριο παιχνιδιών - games-workshop.com/en-EU/Home Golden - goldenpaints.com Warcolours - warcolours.com Mission Models - missionmodelsus.com MRP (MrPaint) (Χρώμα λάκας) - mrpaint.sk Lifecolor - military-modelling.com/c-3358365/lifecolor-paint-sets/ Abteilung (Ακρυλικό και λαδομπογιά) - abteilung502.com Colour Standards provide a reference point industry can trust when measuring colour in military colouring and camouflage, national and company transport, paint manufacturers, and hobby enthusiasts, particularly those who build models of a certain period, armies, transport, or wars. Colour standards can be applied to numerous purposes, and range from ultraviolet, visible, to infrared, wavelength ranges of 300 - 800nm. ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ Besides colour, the next obvious feature of a colour standard is its surface property, these range from high gloss, mid-gloss to matte. One can often see if the light is reflected or diffused on a matte surface. ​ The reflected light is specular light, this leaves the surface at an equal and opposite angle to that of the incident light. ​ However, the colour of many materials is not specular light, so to measure the colour of a standard, one needs to ignore the specular light and concentrate on the diffuse light measurement to fathom the colour of the standard. ​ Even today, not all paint is equal, paint is produced by a multitude of manufacturers in numerous countries colour, quality and various paint colour standards are used. ​ Many manufacturers provide colour conversion charts and in most cases these are fine. But if like me, you may use many paint manufacturers finding the right paint colour conversion can be time-consuming. So, I started to design a database to store the colours I mostly use. When a new colour materialises, I add it to the database. ​ I also add the standard codes used by some areas to define paint colours into the database: This manufacturer paint conversion document is not yet complete, but it is constantly being updated:. ​ Click on the button to download the database: The standard codes used by some areas to define paint colours into the database: ​ RAL – European colour matching standard that defines paint colours, plastics, and coatings colours. RAL is administrated by the RAL Deutsches Institut für Gütesicherung und Kennzeichnung, it is the abbreviation of ‘ R eichs- A usschuß für L ieferbedingungen und Gütesicherung’. Which means, ‘National Commission for Quality Assurance and Labelling’. ​ FS - F ederal S tandard is the colour description and communication system developed by the United States government in 1956. Its roots began in World War II when a problem was highlighted, that of providing exact colour specifications to military equipment subcontractors in different parts of the world became a matter of importance. But in 1991, Urban Fredriksson’s Colour Reference Charts were first published, which soon became the 'de facto standard * ’ for communicating colour data between historical camouflage colour researchers and modelling enthusiasts to determine the correct colours for model paints throughout the world. Known as 595a/595B, often abbreviated as ‘FED-STD-595B’ as they have no official names. ​ RLM - The State Ministry of Aviation ‘ R eichs L uftfahrt M inisterium’, defined the colours used by the Luftwaffe. They established a standard for colour shades, their production, and applications. There were directives, but other regulations, some of which had been established before the formation of the RLM itself in 1933, limited the number of colours available and fortified production from pigments obtainable within Germany. The paint was supplied by several companies and even though aircraft manufacturers could choose what commercial products to purchase, they had to adhere to specific uniform standards, characterised by the Farbtontafel and later by individual paint imperfections. Following is a list of RLM (Reichsluftfahrt Ministerium) paint designations used by the German Ministry of Aviation from 1933 through 1945. ANA - A rmy- N avy A eronautical Paint Colours were used by the US Federal Government from 1943 through to 1970 to standardize colours for aircraft manufactured by the American aircraft industry. But the ANA standard was abandoned in 1970 when the colour standards were transferred to the Federal Standard 595A. BS - B ritish S tandards for colours are the United Kingdom standard for colours, it is amalgamated under the Royal Charter ‘National Standards Body’. British Standards exist to guarantee the level of quality and consistency. BS 4800 is the standard range of colours for paints, created by the British Colour Council. and is used mainly in construction and interior decoration. A colour’s name may change, but its number is constant. In 1930 the ‘British Colour Council’ came into being, its core objective was organising a standard code for colours to maintain clarity. ​ *The term de facto standard is used in contrast with obligatory standards known as ‘de jure standards’, or to express a dominant voluntary standard when there are many standards accessible for the same use.

ΕΠΙΚΟΙΝΩΝΙΑ Ας μιλήσουμε Τηλ: 44-07714014598 grey@qafmodels.com Μη διστάσετε να επικοινωνήσετε μαζί μου αν έχετε απορίες Επιτυχία! Το μήνυμα ελήφθη. Στείλετε

Wired Network System Wired LANs (Local Area Networks) use Ethernet cables and network adapters. ​ There are two ways to set up a LAN system: ​ Broadband routers often provide DSL Internet connections and because they normally have additional facilities that allow direct connections for a shared printer or server. ​ Two computers can be directly wired to each other using an Ethernet crossover cable. ​ Using a central device or devices like a router, hubs, switches to connect more than two computers, servers, or printers. ​ Installation Ethernet cables must run from the router to each computer, printer, or server. It can be costly, laborious, and messy to run cables through a house, either under the floor or through walls, especially if you have an old Victorian house like mine. Even in newer houses chasing out the walls for cables or taking up the floorboards can take some time and be very messy. Luckily for some people, newer homes are often being pre-wired with CAT5 cables and RJ-45 sockets. These are wired sockets ready to accept your cables. If you are willing to put in the time and mess, it is a simple matter to fit CAT5 cables and RJ-45 sockets. We will explore what is needed and how to achieve this later. Once the hardware has been installed the configuration of the wired or wireless LANs are similar. Both rely on standard Internet Protocol (IP) and network operating system configuration options. These will be discussed later. ​ Cost In this age of financial constraints, the cost is the biggest denominator when deciding whether to opt for a wired or wireless network. If your computer, router, and printer are in proximity a wired system will cost little more than a wireless option. Most Internet providers supply a free router, Ethernet cable and with ADSL a filter with your package. Because of this you only need to buy an additional CAT5 cable to connect your printer. Of course, you can bypass this requirement by connecting your printer via a USB cable. If you only require a cable, CAT 5 Cable – prices vary depending on the length, but you can expect to pay between £2.50 and £6.00 for a 5-metre length. For installing a fitted wired system, the cost will be higher as you will need for each outlet: RJ45 RJ11 Cat5 Network Tool Kit Cable Tester Crimp Lan - £18.50 Cat 5 Single Socket RJ45 Ethernet Network Face Plate - £2.00 Wall box for faceplate - £2.00 RJ45 Connector Network Cable CAT5 Crimp Ends Plugs x 10 - £1.00. Ethernet CCA Cable Roll Network LAN Solid UTP CAT5e-CCA Grey 100m - £10.00 ​ These prices do not usually very much. I buy my stuff from Amazon and a local electrical outlet. ​ Reliability Ethernet cables, routers, and switches are exceptionally reliable, mostly due to the manufacturer’s commitment to improving Ethernet technology. Ethernet technology is an ever-expanding structure and companies are continuously funding research into improving the communications systems. A great deal of advancements has occurred during the past few years in the wireless arena, and this has been directed because of the need to strengthen security and improve wireless systems. With cabled systems, if you take time to fasten cables and making sure the wires in the RJ-45 boxes are wired correctly and secure will help eliminate problems with wired networks. I have had several Broadband routers fail, so reliability is still an on-going concern. If this occurs contact your Broadband provider and they should replace it for you, or you can buy a better model. Wired networks are more reliable, faster, and secure than their wireless counterparts. Performance ​ Despite the improvements of wireless routers over the past few years wired LANs still provide better performance and reliability over wireless systems. In the past, wired Ethernet connections have increased from 10 Mbps bandwidth to 100 Mbps and now 1000Mbps is now commonplace. Wired LANs using a hub might sustain performance slowdown if several computers, servers, or printers are heavily using the network at the same time. To help prevent this use Ethernet switches. Security ​ Routers come with Firewall software installed. Because of this when wired networks (LANs) are connected to the Internet the Firewall will provide an element of security. However, wired Ethernet hubs and switches do not have firewalls. ​ To help protect your computer from Intrusion, Trojans, and Viruses you will need antivirus and firewall software installed on your computer. I use ESET and Malwarebytes, there are free alternatives, but I find the free options significantly less secure and reliable. Nearly all the infected computers I worked on in the industry had free versions and the removal of the risk and preventing data loss always cost more than purchasing the paid anti-virus and malware software combined. ​ Although Broadband routers have firewalls installed, these are not reliable so do not rely on this alone to protect your computers. ​ KEEP the antivirus and malware software updated on a regular basis, as new threats come onto the web daily.

HTML HTML is not a programming language, denoting it does not have the ability to create dynamic functionality. As an alternative, it makes it possible to organize and format documents, comparably like Microsoft Word. HTML stands for Hypertext Markup Language and it permits users to create and structure sections, paragraphs, headings, links, and block-quotes for web pages and applications. ​ When working with HTML, simple code structures (tags and attributes) to mark up a website page are used. An example being the creation of a paragraph by placing the enclosed text within a starting and closing tags. ​ Hypertext Markup Language (HTML) is the standard Markup Language for documents designed to be displayed in web browsers and can be helped by technologies such as Cascading Style Sheets (CSS) and scripting languages such as JavaScript. ​ Web browsers receive HTML documents from a web server or from local storage then render the documents into multimedia web pages. An example is: < !DOCTYPE html > < html > < head > < title > Page Title < /title > < /head > < body > < h1 > Heading of website < /h1 > < p > First paragraph used in site < /p > < /body > < /html > So, what does it mean? < !DOCTYPE html > declaration defines this document as an HTML5 document. < html > element is the root part of an HTML page. < head > portion contains meta information about the HTML page. < title > section specifies a title for the HTML page - used to name the 'Title' of your page. < body > element defines the document's body and is a container for all the visible contents - this is where you put your headings, paragraphs, images, hyperlinks, tables, and lists. < h1 > part defines a large heading. < p > section defines a paragraph/s the text written on this page is written in this section between the <> . ​ <> is known as 'Tags', there is a 'Start Tag' and an 'End Tag', data is written between them and ​ If you can right-click a web page and click on 'View Source' to see how HTML aspects of that page. HTML tags are like keywords that define that how a web browser will format and display its content. Using tags web browsers can distinguish between HTML and its content. HTML tags contain three main parts: ​ Start (opening) tag. Content. End (finishing) tag. ​ When web browsers read HTML documents it reads them from top to bottom and left to right. HTML tags are used to create HTML documents and render their properties and each HTML tag has different properties depending on its function. ​ An HTML file must have some essential tags so that the web browser can differentiate between simple text and HTML text. You can use as many tags as you want as per your code requirement.

Recipes Bread - there is nothing like home-baked bread. The benefits of home baking are renowned throughout the world, it is healthier, and you have control over what ingredients go into each batch. If you purchase bread from the store, there will be a long ingredient list, like: Potassium bromate. Partially hydrogenated oil: Azodicarbonamide. Store bread can also often have preservatives to extend its shelf life. Baking your own can make your bread healthier using nutritious ingredients, like: ​ Whole wheat. Honey. Wild Rice Bread. Sunflower Seeds. Tomatoes. Cheese. Herbs. Fruit. Sandwich Bread Loaf

RAID Striping 0 to 4 RAID 0 Striping ​ With RAID 0 the data is written across multiple drives to improve access performance. There is no data redundancy. So, a 4Meg file would be written across 4 drives in 1Meg pieces. Because of this, the failure of one drive will render the data inaccessible, but the advantage is considerably higher throughput. RAID 1 (mirroring without parity or striping) With RAID 1 data is written identically to two drives, thereby producing a ‘mirrored set’. The read request is examined by either of the two HDDs containing the requested data, whichever one involves the least seek time plus rotational latency. ​ Similarly, a written request updates the stripes of both drives. The write performance depends on the slower of the two writes, such as, the one that involves a larger seek time and rotational latency. ​ At least two drives are required to constitute such an array. While more constituent drives may be employed, but many applications deal with a maximum of only two. The array continues to operate if at least one drive is functioning. Key: A, B, C, D, E, and F are blocks of data RAID 2 has bit-level striping with dedicated Hamming-code parity, all disk spindle rotation is synchronized, and data is striped so that each sequential bit is on a different drive. Hamming-code parity is calculated across matching bits and stored on at least one parity drive. ​ RAID 3 has byte-level striping with dedicated parity, all disk spindle rotation is synchronized and data are striped so each sequential byte is on a different drive. Parity is calculated across matching bytes and stored on a dedicated parity drive. ​ RAID 4 is block-level striping with dedicated parity and is equivalent to RAID 5 but all parity data is stored on a single drive. In this configuration files can be dispersed between multiple drives. Each drive operates independently allowing I/O requests to be performed in parallel. ​ RAID 2 is more of a theoretical system and not used in practice. But although applications for RAID 3 exist it is not commonly used in practice.